More Power RacingFree ShippingFind the additional tools you need to take your power commander to the next level.

Accessories (LCD, HUB's)

Accessories (LCD, HUB's)

Find the additional tools you need to take your power commander to the next level.

Large ViewLarge View
Products

LCD Crystal Display for Power Commander

For Power Commander III USB LCD Crystal Display for Power Commander

The LCD Display connects to any Power Commander USB (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.

Multiple maps can be stored in the unit (requires optional SD memory card, not included). These maps can be sent to the Power Commander “on the fly.” Additionally, maps can be adjusted using the controls on the display.

The LCD Display has the ability to log the data being displayed later analysis (requires optional SD memory card, not included).

Price $224.95

Multi-Function Hub

For Power Commander III USB Multi-Function Hub

The Multi-Function Hub allows users to access advanced expansion features. Several optional harnesses are available to permit both input and output to/from the module.
Connecting the optional Map Selection Switch allows the rider to switch between two different maps within the Power Commander. For Touring Bikes this could be used to switch between a "fuel economy map" for long rides and a "full performance map".

For Sport Bikes it could be used for applications such as "Dry Nitrous Oxide" kits to permit the user to make the fuel mixture richer when activating the system. Additionally, if the Power Commander has an Ignition Module connected it can switch to a less aggressive timing map at the same time.

Fuel and ignition timing (when using the Dynojet Ignition Module) adjustments can be made based on gear position or speed. The multi-function hub makes it possible for the user to advance the timing in lower gears while retarding it in higher gears.

Price
Hub OnlyHUB-001 $124.95
W/Map Selection SwitchHUB-002 $134.95
Includes switch bar bracket
W/Multi Selection SwitchHUB-003 $164.95
Includes map switch and handle bar bracket, gear position/speed, pressure input and relay harnesses

Multi-Function Hub Accessories

For Power Commander III USB Multi-Function Hub Accessories

Connecting the optional Map Selection Switch allows the rider to switch between two different maps within the Power Commander. For Touring Bikes this could be used to switch between a "fuel economy map" for long rides and a "full performance map"

Fuel and ignition timing (when using the Dynojet Ignition Module) adjustments can be made based on gear position or speed. The multi-function hub makes it possible for the user to advance the timing in lower gears while retarding it in higher gears.

Price
Handle Bar Bracket for Map Switch 61329304 $15.95
Gear Position/Speed Harness76950212 $19.95
Allows input of gear position and/or speed into the hub
Pressure Input Harness w/Bare Ends76950012 $21.95
Pressure Input Harness w/GM 3 Bar Sensor Connector76950325 $29.95
sensor NOT included
Relay Harness76950506 $29.95
Map Switch & Harness Only76950320 $45.95

O2 Optimizer

Dynojet

Please contact Dynojet for fitment applications.

Price
O2 Optimizer76125027 $110.00

Power Vision

Power Vision

Power Vision downloads and stores the stock calibration, and lets you select up to 6 different tunes that are stored on the device, and can be flashed to your bike. The types of tunes include:

Dynojet Preconfigured Tunes - Tunes for YOUR bike pre-loaded on the device... ready to go, right out of the box! Power Vision identifies your bike’s information and automatically sorts hundreds of applicable dyno proven tunes for you to choose from.

Custom Tunes – loaded by a custom tuning shop, or received via email and loaded on the device. Copy of Stock – a version of the stock calibration that is editable.

Power Vision provides insightful, valuable information on how your bike is running.

Price
Power Vision 1PV-1 $439.95
Fits any Harley with Delphi ECM
Power Vision 2PV-2 $439.95
Fits 2011 Harley Softails