More Power RacingFree ShippingMost cams trade low-end power and torque for upper horsepower or top-end performance for low-end torque. Küryakyn’s Wild Things Cams are finessed to give wide useable power-bands with strong low end, big torque, high horsepower and extended RPM ranges. Low noise and long valve train life are also fe

Kuryakyn

Kuryakyn

Most cams trade low-end power and torque for upper horsepower or top-end performance for low-end torque. Küryakyn’s Wild Things Cams are finessed to give wide useable power-bands with strong low end, big torque, high horsepower and extended RPM ranges. Low noise and long valve train life are also features built into our Cams. No other cams on the market can replicate the results of Wild Things Cams, period!

Products

Andrews Gear Drive Installation Kit

Kuryakyn Andrews Gear Drive Installation Kit

Designed for S&S Gear Drives, this kit includes roller bearings to replace the stock ball bearings, a new snap ring, and a gasket for the cam cover. Recommended for all Wild Things gear-drive cams used with S&S Gear Drive Kits.

Price
Gear Drive Install Kit 418KUR $49.95

Comp Cams High Lift Spring Kit

Kuryakyn Comp Cams High Lift Spring Kit

This high quality High Lift Spring Kit is a must when using any of our high performance Cams (TC-4G, TC-46G, TC-5G, TC-26G, TC-546G, ER-2, or ER-46) on '84-'99 Evolution or '99-'04 Twin Cam engines.

  • Titanium top retainer
  • Interference wound double springs with damper
  • For use with cams up to .640" lift
  • 180 lb. seat pressure
  • Can be used in '05-later engines if valves and guides have been converted to 5/16" diameter

    Price
    Spring Kit (set)435KUR $142.00
  • ER-46 Cams

    1984-1999 Evolution Big Twin ER-46 Cams

    Evo version of the venerable TC46-G. Make that big incher come to life. Intended for engines 96 inches and up. Headwork, large carb, performance pipes, and high compression will really make this cam shine. Valve springs and spacing required. We recommend Comp Cams Spring Kit, P/N 435KUR.

    Intake Specifications:

  • Lift (inches) - .625
  • Opening (degrees) - 24
  • Closing (degrees) - 56
  • Duration (degrees) - 260
  • Lobe Center (degrees) - 106


  • Exhaust Specifications:
  • Lift (inches) - .575
  • Opening (degrees) - 56
  • Closing (degrees) - 16
  • Duration (degrees) - 252
  • Lobe Center (degrees) - 110
  • Price
    ER-46 Cams (set)404KUR $179.95
    Fits '84-'99 Evolution Big Twin

    S&S Gear Drive Kit

    Kuryakyn S&S Gear Drive Kit

    Improve performance over the stock chain drives by accurately controlling valve timing and reducing frictional losses. Requires Andrews Gear Drive Installation Kit.

  • Note:Installation Kit (P/N 418KUR) required.
  • Price
    S&S Gear Drive (ea)419KUR $336.95

    TC-1, TC-1G, TC-1U Cams

    1999-2006 Twin Cam (ex. 2006 Dyna) TC-1, TC-1G, TC-1U Cams

    Bolt-in low-end and mid-range power with a little more up top. 80+ horsepower possible with o head work in an 88". Also works very well in 95" motors up to 10:1 compression. TC1-G is the gear drive version of the TC-1; gear drive give you more accurate timing and more long-term power and reliability by eliminating the drive chain strach and the possibility of tensioner failure on '99-'06 models.

    Intake Specifications:

  • Lift (inches) - .510
  • Lift @ TDC (inches) - .158
  • Opening (degrees) - 15
  • Closing (degress) - 41
  • Duration (degrees) - 236
  • Lobe Center (degrees) - 103


  • Exhaust Specifications:
  • Lift (inches) - .498
  • Lift @ TDC (inches) - .121
  • Opening (degrees) - 40
  • Closing (degress) - 08
  • Duration (degrees) - 228
  • Lobe Center (degrees) - 106
  • Price
    TC-1 Cams (set)420KUR $297.95
    Note: Uses stock splined gear and chain. '99 models with keyed drive gear will have to install a splined gear.
    TC-1G Cams (set)422KUR $297.95
    Note: Requires an S&S Gear Drive and installation kit (sold separately).
    TC-1U Cams (set)470KUR $297.95
    Upgrade '06-earlier to '07 Chain drive

    TC-2, TC-2G, TC-2U Cams

    1999-2006 Twin Cam (ex. 2006 Dyna) TC-2, TC-2G, TC-2U Cams

    Bolt-in performance Cam for 88" to 103" motors. Gain more power over the whole RPM range. 90+ horsepower is possible in an 88" with no head work, but really comes alive with more inches and higher compression.

    Intake Specifications:

  • Lift (inches) - .510
  • Lift @ TDC (inches) - .169
  • Opening (degrees) - 18
  • Closing (degress) - 50
  • Duration (degrees) - 248
  • Lobe Center (degrees) - 106


  • Exhaust Specifications:
  • Lift (inches) - .495
  • Lift @ TDC (inches) - .145
  • Opening (degrees) - 48
  • Closing (degress) - 14
  • Duration (degrees) - 242
  • Lobe Center (degrees) - 107
  • Price
    TC-2 Cams (set)425KUR $279.95
    Note: Uses stock splined gear and chain. '99 models with keyed drive gear will have to install a splined gear.
    TC-2G Cams (set)423KUR $279.95
    Note: Requires an S&S Gear Drive and installation kit (sold separately).
    TC-2U Cams (set)471KUR $279.95
    Upgrade '06-earlier to '07 chain drive.

    TC-26D Cams

    2007-2008 Twin Cams & 2006 Dynas TC-26D Cams

    High lift version of the TC-2G. Great all around power potential from this cam. With the Wild Things heads, pistons, and throttle body, we have made over 120 HP. A very street friendly cam.

  • Note: Some clearancing, valve springs and spacing required. We recommend Comp Cams Spring Kit, P/N 435KUR.


  • Intake Specifications:
  • Lift (inches) - .575
  • Lift @ TDC (inches) - .175
  • Opening (degrees) - 18
  • Closing (degress) - 50
  • Duration (degrees) - 248
  • Lobe Center (degrees) - 106


  • Exhaust Specifications:
  • Lift (inches) - .495
  • Lift @ TDC (inches) - .145
  • Opening (degrees) - 48
  • Closing (degress) - 14
  • Duration (degrees) - 242
  • Lobe Center (degrees) - 107
  • Price
    TC-26D461KUR $314.95
    Fits '06 Dyna and all '07-'08 Twin Cam

    TC-26G, TC-26U Cams

    1999-2006 Twin Cam (ex. 2006 Dyna) TC-26G, TC-26U Cams

    High lift version of the TC-2G. Great all around power potential from this cam. With the Wild Things heads, pistons, and throttle body, we have made over 120 HP. A very street friendly cam.

  • Note: Some clearancing, valve springs and spacing required. We recommend Comp Cams Spring Kit, P/N 435KUR.


  • Intake Specifications:
  • Lift (inches) - .575
  • Lift @ TDC (inches) - .175
  • Opening (degrees) - 18
  • Closing (degress) - 50
  • Duration (degrees) - 248
  • Lobe Center (degrees) - 106


  • Exhaust Specifications:
  • Lift (inches) - .495
  • Lift @ TDC (inches) - .145
  • Opening (degrees) - 48
  • Closing (degress) - 14
  • Duration (degrees) - 242
  • Lobe Center (degrees) - 107
  • Price
    TC-26G408KUR $279.95
    Note: High lift springs and clearancing required.
    TC-26U472KUR $279.95
    Upgrade '06-earlier to '07 chain drive

    TC-2D Cams

    2007-2008 Twin Cams & 2006 Dynas TC-2D Cams

    Bolt-in performance Cam for 88" to 103" motors. Gain more power over the whole RPM range. 90+ horsepower is possible in an 88" with no head work, but really comes alive with more inches and higher compression.

    Intake Specifications:

  • Lift (inches) - .510
  • Lift @ TDC (inches) - .169
  • Opening (degrees) - 18
  • Closing (degress) - 50
  • Duration (degrees) - 248
  • Lobe Center (degrees) - 106


  • Exhaust Specifications:
  • Lift (inches) - .495
  • Lift @ TDC (inches) - .145
  • Opening (degrees) - 48
  • Closing (degress) - 14
  • Duration (degrees) - 242
  • Lobe Center (degrees) - 107
  • Price
    TC-2D Cams (set)460KUR $279.95
    Fits: '06 Dyna and all '07-'08 Twin Cam

    TC-46D Cams

    2007-2008 Twin Cams & 2006 Dynas TC-46D Cams

    High lift of the TC-4G. 95" and up motors can make some impressive power over a wide power band. 120+ horsepower possible in a 95". Increased compression and head work, large carb/throttle body and performance pipes necesarry if you want to make full use of this Cam.

  • Note:Some clearancing, valve springs and spacing require.We recommend Comp Cams Spring Kit, P/N 435KUR.


  • Intake Specifications:
  • Lift (inches) - .625
  • Lift @ TDC (inches) - .230
  • Opening (degrees) - 26
  • Closing (degress) - 54
  • Duration (degrees) - 260
  • Lobe Center (degrees) - 104


  • Exhaust Specifications:
  • Lift (inches) - .575
  • Lift @ TDC (inches) - .182
  • Opening (degrees) - 52
  • Closing (degress) - 20
  • Duration (degrees) - 252
  • Lobe Center (degrees) - 106
  • Price
    TC-46D Cams (set)463KUR $279.95
    Fits: '06 Dyna, all '07-'08 Twin Cam 103" Builds

    TC-46G Cams

    1999-2006 Twin Cam (ex. 2006 Dyna) TC-46G Cams

    High lift of the TC-4G. 95" and up motors can make some impressive power over a wide power band. 120+ horsepower possible in a 95". Increased compression and head work, large carb/throttle body and performance pipes necesarry if you want to make full use of this Cam.

  • Note:Some clearancing, valve springs and spacing require.We recommend Comp Cams Spring Kit, P/N 435KUR.


  • Intake Specifications:
  • Lift (inches) - .625
  • Lift @ TDC (inches) - .230
  • Opening (degrees) - 26
  • Closing (degress) - 54
  • Duration (degrees) - 260
  • Lobe Center (degrees) - 104


  • Exhaust Specifications:
  • Lift (inches) - .575
  • Lift @ TDC (inches) - .182
  • Opening (degrees) - 52
  • Closing (degress) - 20
  • Duration (degrees) - 252
  • Lobe Center (degrees) - 106
  • Price
    TC-46G Cams (set)424KUR $279.95
    Note: Requires and S&S Gear Drive and installation kit (sold separately).

    TC-4D Cams

    2007-2008 Twin Cams & 2006 Dyna TC-4D Cams

    Big power available in 95" and up motors. Increased compression and head work, large carb or throttle body and pipes will really make this Cam shine. Well over 110 horsepower is possible, even mid to high teens from a modified 95"

    Intake Specifications:

  • Lift (inches) - .560
  • Lift @ TDC (inches) - .217
  • Opening (degrees) - 26
  • Closing (degress) - 54
  • Duration (degrees) - 260
  • Lobe Center (degrees) - 104


  • Exhaust Specifications:
  • Lift (inches) - .550
  • Lift @ TDC (inches) - .181
  • Opening (degrees) - 52
  • Closing (degress) - 20
  • Duration (degrees) - 252
  • Lobe Center (degrees) - 106
  • Price
    TC-4D Cams (set)462KUR $279.95
    Fits: '06 Dyna, all '07-'08 Twin Cam

    TC-4G, TC-4U Cams

    1999-2006 Twin Cam (ex. 2006 Dyna) TC-4G, TC-4U Cams

    Big power available in 95" and up motors. Increased compression and head work, large carb or throttle body and pipes will really make this Cam shine. Well over 110 horsepower is possible, even mid to high teens from a modified 95"

    Intake Specifications:

  • Lift (inches) - .560
  • Lift @ TDC (inches) - .217
  • Opening (degrees) - 26
  • Closing (degress) - 54
  • Duration (degrees) - 260
  • Lobe Center (degrees) - 104


  • Exhaust Specifications:
  • Lift (inches) - .550
  • Lift @ TDC (inches) - .181
  • Opening (degrees) - 52
  • Closing (degress) - 20
  • Duration (degrees) - 252
  • Lobe Center (degrees) - 106
  • Price
    TC-4G Cams (set)421KUR $279.95
    Note: Requires S&S Gear Drive (sold separately)
  • valve springs and spacing required.
  • TC-4U Cams (set)421KUR $279.95
    Upgrade '06-earlier to '07 Chain drive.

    TC-546D

    2007-2008 Twin Cams & 2006 Dynas TC-546D

    A Wild Things cam for engines over 100 C.I. Huge power gains available while still retaining good drivability and a quiet running engine. Really helps in starting those high compression large inch engines.

  • Note:Some clearancing, valve springs and spacing required.We recommend Comp Cams Spring Kit, P/N 435KUR.


  • Intake Specifications:
  • Lift (inches) - .630
  • Lift @ TDC (inches) - .234
  • Opening (degrees) - 27
  • Closing (degress) - 59
  • Duration (degrees) - 266
  • Lobe Center (degrees) - 106


  • Exhaust Specifications:
  • Lift (inches) - .575
  • Lift @ TDC (inches) - .182
  • Opening (degrees) - 52
  • Closing (degress) - 20
  • Duration (degrees) - 252
  • Lobe Center (degrees) - 106
  • Price
    TC-546D Cams (set)464KUR $299.95
    Fits: '06 Dyna, all '07-'08 Twin Cam with 103" Builds

    TC-546G Cams

    1999-2006 Twin Cam (ex. 2006 Dyna) TC-546G Cams

    A Wild Things cam for engines over 100 C.I. Huge power gains available while still retaining good drivability and a quiet running engine. Really helps in starting those high compression large inch engines.

  • Note:Some clearancing, valve springs and spacing required.We recommend Comp Cams Spring Kit, P/N 435KUR.


  • Intake Specifications:
  • Lift (inches) - .630
  • Lift @ TDC (inches) - .234
  • Opening (degrees) - 27
  • Closing (degress) - 59
  • Duration (degrees) - 266
  • Lobe Center (degrees) - 106


  • Exhaust Specifications:
  • Lift (inches) - .575
  • Lift @ TDC (inches) - .182
  • Opening (degrees) - 52
  • Closing (degress) - 20
  • Duration (degrees) - 252
  • Lobe Center (degrees) - 106
  • Price
    TC-546G Cams (set)409KUR $279.95
    Note: High lift springs and clearancing required.

    TC-5G Cams

    1999-2006 Twin Cam (ex. 2006 Dyna) TC-5G Cams

    High HP and torque cruiser cam for 103" and larger engines. High compression, headwork, large carburetor or throttle body, and performance pipes will bring out the most with this cam.

  • Note: Valve Springs and spacing required. We recommend Comp Cams Spring Kit, P/N 435KUR


  • Intake Specifications:
  • Lift (inches) - .590
  • Lift @ TDC (inches) - .225
  • Opening (degrees) - 27
  • Closing (degress) - 59
  • Duration (degrees) - 266
  • Lobe Center (degrees) - 106


  • Exhaust Specifications:
  • Lift (inches) - .560
  • Lift @ TDC (inches) - .189
  • Opening (degrees) - 58
  • Closing (degress) - 22
  • Duration (degrees) - 260
  • Lobe Center (degrees) - 108
  • Price
    TC-5G Cams (set)426KUR $279.95
    Note: Requires S&S Gear Drive and installation kit (sold separately).
  • Valve springs and spacing required.