More Power RacingFree ShippingSelect your style.

Kuryakyn

Kuryakyn

Select your style.

Products

Ball-Milled License Plate Frames

Kuryakyn Ball-Milled License Plate Frames

The one thing most custom license plate frames have in common is they are too small to fit about half of the state’s license plates! This frame is offered in two sizes to fit 4-3/8" x 8" and 4" x 7" plates. Depending on which plate you're working with, some minor modifications may still be necessary, but this will make many installations much easier.

This great looking new frame is finished in glistening chrome, and has ball-milled accents.

Price
Small Frame (ea)9163KUR $29.95
4" x 7" Plate
Large Frame (ea)9164KUR $29.95
4-3/8" x 8" Plate

Curved Fender Tip License Plate Mount

Kuryakyn Curved Fender Tip License Plate Mount

You asked for it – Kuryakyn designed it! This very classy curved license plate mount hugs the contour of the fender and replaces the existing fender tip. This base plate design incorporates a stylized tip, red L.E.D. lights and a light to illuminate the plate itself while cleaning up the clutter on the rear fender.

A simplified wiring solution readily plugs in on ’96-’07 Touring models and ‘96-’07 Softails. Hardwiring is required on earlier models.

  • Replaces Fender Tip LIght on '80-'07 Dresser and Road King and '86-'07 FLST/C

    • Price
    License Plate Mount (ea)3164KUR $144.95

    Curved Laydown License Plate Mount with Frame

    Kuryakyn Curved Laydown License Plate Mount with Frame

    This super cool, curved laydown license plate bracket is a major improvement over the stock “billboard” plate mount on many H-Ds. The curved frame mates cleanly with the backing plate for a finished and completely custom look. Accents 4" x 7" Plates.

    Fits:

  • Any H-D model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
  • '03-'07 VTX 1300/S Retro
  • 02-'07 VTX 1800 Retro/S/T Models.

    • Price
    Plate Mount with Frame (ea)9171KUR $66.95

    Curved License Plate Mount for FLHX

    Kuryakyn Curved License Plate Mount for FLHX

    The new Street Glide is way cool, but this bolt on gracefully curved license plate mount makes a big difference. Rid yourself of the stock black bracket and the flat look. No Drilling – No need for a new license plate light. Just bolt it on and go!

    Fits:

  • '06-'07 FLHX Street Glide

    • Price
    Mount for FLHX (ea)3163KUR $66.95

    Curved Side Mount License Holder

    Kuryakyn Curved Side Mount License Holder

    In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style and function. Sized to fit 4" x 7" plates only, this trick product is available with or without an auxiliary run-brake taillight.

  • Note: Softail applications are compatible with or without our Swingarm Covers (P/N's 8102KUR, 8108KUR, 8221KUR, 8222KUR, 8228KUR, 8256KUR, 8284KUR, 8288KUR).

    • Price
    W/out Taillight (ea)3173KUR $107.95
    Fits:
  • '90-'05 Dyna and '86-'07 Sportster Models
    		•
    W/out Taillight (ea)3180KUR $107.95
    Fits:
  • '07 Softail Models
    		•
    W/Taillight (ea)3170KUR $152.95
    Fits:
  • '86-'06 Softail Models
    		•
    W/Taillight (ea)3172KUR $152.95
    Fits:
  • '90-'05 Dyna and '86-'07 Sportster Models
    		•
    W/Taillight (ea)3179KUR $152.95
    Fits:
  • '07 Softail Models
    		•

    Deluxe Bullet Light Rear Turn Signal Bar Kit

    Kuryakyn Deluxe Bullet Light Rear Turn Signal Bar Kit

    Küryakyn makes it easy to give the rear fender on Road Kings, Road Glides, and FLHT Standards a clean, uncluttered look like the FLHX without breaking the bank.

    The kit includes our Bullet Light Rear Turn Signal Bar (P/N 2098KUR), Curved License Plate Frame (P/N 3162KUR), and Rear Bar Accent (P/N 1320KUR) to cover the mounting holes left uncovered by removal of the stock license plate.

    Buy this kit and save! No need to buy these parts separately!

    Fits:

  • ’97-’07 Road King Models (ex. ’07 FLHRSE)
  • ’98-’07 Road Glide
  • ’97-’07 FLHT Standard

    • Price
    Kit3000KUR $186.95

    Inspection Sticker Plate

    Kuryakyn Inspection Sticker Plate

    This small chrome display bracket mounts cleanly in any location dictated by local or state regulations. Now you don't have to mess up a nice paint job or chrome surface with some cheesy government sticker. Universal fitment.

    Price
    Texas Sticker Plate (ea)9162KUR $39.95
    Plate 2-7/8" x 4"
    Inspection Sticker Plate (ea)9162KUR $39.95
    Plate 3-1/2" x 3-1/2"

    L.E.D. License Plate Bolt Lights

    Kuryakyn L.E.D. License Plate Bolt Lights

    Light up your license plate whether it's in the stock location or custom mounted with these white L.E.D. bolt lights. With simple installation and a clean look. You won't find a cleaner license plate lighting option.

    Price
    Plate Bolt Lights (pr)9199KUR $24.95

    Lay Down License Plate Holder

    Kuryakyn Lay Down License Plate Holder

    Designed to replace Harley's standard 3-bolt license plate bracket, this baby streamlines your fender by tilting the plate back. Kit includes rubber wedge so you have an option as to how far the plate lays down.

    Price
    Plate Mount (ea)9165KUR $39.95

    Lay Down License Plate Holder for Road Kings and Road Glide

    Kuryakyn Lay Down License Plate Holder for Road Kings and Road Glide

    Here's an easy way to give your Road King a sleeker look. This license plate bracket lays down to compliment the lines of the fender, rather than standing up like a billboard. Mounts in the same location as the stock piece. Easy to install.

  • Fits Road King and Road Glide without Tour Paks

    • Price
    Plate Holder (ea)113KUR $39.95

    License Frame and Back Plate Set

    Kuryakyn License Frame and Back Plate Set

    Our chrome frame and back plate will dress up your license plate when using the stock bracket. Fits 4" x 7" plates.

    Price
    Frame and Back Plate (set)9166KUR $24.95

    License plate frame

    Kuryakyn License plate frame

    Dress up your license plate from the front, back and sides with this die-cast, chrome-plated frame. This license plate frame includes back plate, frame, and removable inserts that allow it to accommodate both small (4" x 7") and large (4-3/8" x 8") plates. Because the fasteners that secure the frame to the back plate are installed from the rear, this frame can be installed only on license plate mounts less than 8-1/4" wide allowing unobstructed access to the back of the plate. This frame is perfect for use on our P/N 9165KUR or P/N 113KUR license plate holders.

    Price
    License Plate Frame (ea)9158KUR $56.95

    License Plate Marker Light Mount

    Kuryakyn License Plate Marker Light Mount

    Mount auxiliary marker lights or turn signals to your license plate and open up that saddlebag area or just streamline your rear fender. This simple system mounts directly to the back of your license plate with support backing plate and two side mount brackets. The side mount brackets have a 3/8" hole and will accept Küryakyn Silver Bullets or L.E.D. Mini Bullets - available in the Lighting section of this website.

    Price
    Marker Light Mount (ea)4247KUR $39.95

    Lighted License Plate Frame

    Kuryakyn Lighted License Plate Frame

    This chrome die cast license plate frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake and tail lamp circuits or together for an extra bright stop or running light or use your imagination. Fits: 4" x7" Plates

  • Note: Not intended to replace O.E. brake or taillight.

    • Price
    Replacement Bulb (ea)9169KUR $12.00
    License Plate Frame (ea)9167KUR $39.95
    Fits 4" x 7" Plates

    Lighted License Plate Frame

    Kuryakyn Lighted License Plate Frame

    Now you can have it all. Our new, versatile Lighted License Plate Frame holds either small or large license plates, lights the plate with brilliant L.E.D.s, and streamlines the back of your bike. Because the fasteners that secure the frame to the back plate are installed from the rear, this frame can be installed only on license plate mounts less than 8-1/4" wide allowing unobstructed access to the back of the plate. This frame is perfect for use on our P/N 9165KUR or P/N 113KUR license plate holders.

    Price
    Lighted License Plate Frame (ea)9159KUR $80.95

    Lone Eagle License Plate Frame

    Kuryakyn Lone Eagle License Plate Frame

    Show your American pride with this bueaty.

  • Fits: 4" x 7" plates

    • Price
    License Plate Frame (ea)3160KUR $49.95

    Swept Eagle License Plate Frame

    Kuryakyn Swept Eagle License Plate Frame

    An all new contemporary eagle license plate frame can be the final touch you need.

  • Fits: 4" x 7" plates

    • Price
    License Plate Frame (ea)3161KUR $56.95

    Tail Light with Mounting Bracket and License Frame

    Kuryakyn Tail Light with Mounting Bracket and License Frame

    Get rid of two eyesores – the bulky stock taillight and plastic license plate bracket – with this sleek all-in-one chrome wonder. Includes taillight, chrome bracket, and chrome license plate frame for 4" x 7" plates.

    Fits:

  • '85-'99 FXST (ex. Deuce)
  • '80-'86 FXWG.

    • Price
    Bracket and License Frame (ea)9170KUR $80.95

    Vertical Side Mount License Holder w/Light

    Kuryakyn Vertical Side Mount License Holder w/Light

    If they zig, you can zag by moving your license plate off the rear fender to the side. This side- mount license holder with light creates a show-like look and adds visibility with a red L.E.D run & brake light complete with license plate illumination. Its smooth design shows no visible fasteners around the plate. Removable inserts allow it to accommodate both small (4" x 7") and large (4-3/8" x 8") plates.

  • Note: Softail applications are compatibel with or without our Swingarm Covers (P/Ns 8102KUR, 8108KUR, 8221KUR, 8222KUR, 8228KUR, 8256KUR, 8284KUR, 8288KUR).

    • Price
    Holder with Lights (ea)3178KUR $125.95
    Fits:
  • '07 Softail Models
    		•
    Holder with Lights (ea)9151KUR $125.95
    Fits:
  • '86-'06 Softail Models.
    		•
    Holder with Lights (ea)9152KUR $125.95
    Fits:
  • '90-'05 Dyna
  • '86-'07 XL models.
    		•